gating system
英 [ˈgeɪtɪŋ ˈsɪstəm]
美 [ˈgeɪtɪŋ ˈsɪstəm]
浇注系统；浇口
双语例句
- Application of Pro/ TOOLKIT in Development of Design Platform for Gating System of Plastic Injection Mould
Pro/TOOLKIT在注塑模浇注系统设计平台开发中的应用 - Study on The Gating System of Casting Steel by EPC Process
铸钢件消失模铸造浇注系统的试验研究 - The reason for feeding effect improvement of the gating system is analyzed preliminarily.
对该浇注系统提高补缩效果的原因进行了初步分析。 - Research on the Flow of Aluminum Liquid in the Gating System for Aluminum Alloy Wheel
铝合金轮毂低压铸造过程中铝液在浇注系统中流动的研究 - Design of Gating System for Investment Casting Aerospace Components
熔模铸造航空件浇注系统设计和实践 - And the calculation formula and tables of various parameters in gating system could be obtained, which could be used as the reference for preventing the blowhole defects.
据此得出平板铸铁件浇注工艺参数的计算公式及图表，可作为防止侵入性气孔缺陷的工艺设计参考。 - Based Pr/ E Analysis on the Gating System of Plastic Injection Mould
基于Pr/E的塑料注射模具浇注系统的分析 - The Development Research of Gating System of Die Casting Based on Pro/ Engineer
基于Pro/E的压铸模浇注系统开发 - Design and Optimization of Gating System for Cylinder Block Based on Numerical Simulation
基于数值模拟的汽缸体浇注系统的设计与优化 - Based on analogic theory, hydraulic model was founded to choose the optimum gating system for prevention from casting defects including gas hole and misrun.
水力模拟依据相似理论，建立水力模型，选出最佳浇注系统，防止吸气、浇不足等缺陷； - Development of Gating System and Riser System CAD Software Based on PRO/ E for Valve and CAE Systems to Verify
基于Pro/E对阀体件铸造工艺CAD浇冒系统的开发及CAE验证 - For the peripheral equipment of SC, the development of the die and the gating system was mainly presented.
在外围系统部分，主要介绍了挤压铸造模具和浇注系统的研究进展。 - Solution for Dispersed Shrinkage Defect of Auto Break Disc Technical Statistic Investigation on the Kiss Gating System of Cast Iron Wheel
一种汽车刹车盘铸件缩松缺陷的解决方法铸铁轮类件压边浇冒口工艺统计研究 - The cope is then assembled to the drug, and the sand is poured on the cope half, covering the pattern, core and the gating system.
之后将上、下型箱装配在一起，型砂注入上型箱，覆盖模型、型芯和浇道系统。 - The Study of Flow Behavior of Plastic Melt in the Gating System of Injection Mold
塑料熔体在注射模具浇注系统中的流动行为研究 - According to the results of analysis, the edge risers were placed in the two side ribs of casting, the quantity of ribs was reduced, and the gating system was adjusted.
根据模拟分析的结果采取在铸件两个侧筋上加压边冒口、减少表面筋的数量、调整浇注系统等措施修改工艺。 - The Investigation on Gating System of the Hollow Shaft Cam in the Expendable Foam Pattern Casting
气化模铸造空心凸轮轴浇注系统的实验研究 - Study on Gating System of Aluminium Alloy Shell Casting Based on CAE
基于CAE铝合金壳形件浇注系统的研究 - In design part, A method of calculating the gating system parameters is achieved.
设计计算部分对铸钢件浇注系统设计中涉及到的重要参数提供了计算方法。 - Discussion about Design of the Gating System in the Centrifugal Casting Process with Silicone Rubber Mould
低熔点合金饰品硅橡胶型离心铸造浇注系统的设置探讨 - Technical Statistic Investigation on the Kiss Gating System of Cast Iron Wheel Casting method and Equipment Used for Resin Sand-Coated Permanent Mould Cast Wheel Hub Castings
铸铁轮类件压边浇冒口工艺统计研究轮毂类铸件覆砂铁型铸造工艺及设备 - Meanwhile, the gating system of the casting was optimized to provide a reference for improving the technology by applying the software.
同时，应用该软件对铸件的浇注系统进行了工艺优化，为工厂进行工艺的改进和优化提供了科学依据。 - Research and Development in Gating System of Casting Processing CAD
铸造工艺CAD浇注系统的研究与开发 - There are several options available for designing the gating system in die casting process.
压铸工艺中浇注系统的设计往往有多种可供选择的工艺方案。 - Based on the large orifice discharge theory, the kiss gating system of the casting was designed.
运用大孔出流理论设计了顶注压边浇冒口系统。 - The newly developed method of gating system design for zinc alloy in die casting is introduced.
介绍了锌合金压铸浇注系统设计的最新方法。 - Hence, a new research branch for the CAD of gating system has been provided in the paper.
为浇注系统CAD的研究提供了新的参考。 - The article detailly discusses several key problems in the designing of the ceramic form filter gating system.
本文探讨了泡沫陶瓷过滤器浇注系统设计的关键问题。 - The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。 - Design and characteristics of gating system for cast iron in Spain automobiles have been described.
本文介绍了西班牙对汽车铸铁件浇冒口系统的设计方法及其设计特点。